CONDITIONER WOOD CLR PRESTN QT
CONDITIONER WOOD CLR PRESTN QT
Minwax Pre-stain wood conditioner prepares bare wood for staining
Treating the surface with pre-stain wood conditioner helps prevent streaks and blotches by evening out the absorption of oil-based stains
It can be applied over any wood but is especially necessary when working with soft or porous woods like pine, alder, birch and maple
Minwax Pre Stain Wood Conditioner prepares bare wood for staining. It penetrates the grain of the wood to promote uniform acceptance of oil-based stains. Treating the surface with Pre-Stain Wood Conditioner helps prevent streaks and blotches by evening out the absorption of oil-based stains. It can be applied over any wood but is especially necessary when working with soft or porous woods like pine, alder, birch, and maple. Use a cloth or brush to apply. Recoat after 15 minutes, but no more than 2 hours. Dry time in 15 minutes. Normally one coat is sufficient, but additional coats may be applied on highly absorbent woods. Covers approximately 125 square feet per quart. Cleanup with mineral spirits or paint thinner. Minwax Pre-Stain Wood Conditioner is not recommended for use with water-based stains.
FINISH DNSH OIL INT NATURAL QT
FINISH DNSH OIL INT NATURAL QT
Stain, seals and protects in one easy step
Will not crack, chip or peel
Natural Danish Oil Finish Quart is a unique blend of penetrating oil & varnish hardens in the wood, not on the wood. Watco Danish Oil penetrates deep into wood pores to protect from within and to enhance the natural look and feel of the wood. It creates the rich, warm glow of a traditional hand-rubbed finish. Many projects can be completed in less than an hour, simply brush or wipe on and wipe off. Watco Danish Oil is the choice of fine woodworkers and novices alike. Please read product labels for additional directions and precautions before using. Indoor use only not recommended for floors. Stain, Seals, & Protects in one easy step. Will not crack, chip, or peel. For best results apply with a brush, or wipe on with a cloth.
Ready Seal 130 Stain and Sealer, Mahogany, 1 gal Can
Ready Seal? stain and sealer for wood is an oil-based, semitransparent stain and sealer in one. It is a unique blend of oils, quality resins and finely ground pigments that penetrate deeply to protect and preserve the wood from the elements.
Ready Seal 125 Stain and Sealer, Dark Walnut, 1 gal Can
Ready Seal? stain and sealer for wood is an oil-based, semitransparent stain and sealer in one. It is a unique blend of oils, quality resins and finely ground pigments that penetrate deeply to protect and preserve the wood from the elements.
Old Masters 60404 Qt Red Mah Fastdrystain
Red mahogany
Fast dry stain
Oil based
Use on cabinets, doors, furniture, floors or woodwork
Apply second coat or clear finish after only 30 minutes
Deep color intensity with one coat deep penetration
Can be intermixed to create custom colors
Old Masters 61001 Fast Dry Stain, Dark Walnut, Liquid, 1 Gal
Gallon Fast Dry Stain, Dark Walnut
Old Masters- Fast Dry Stain
-fast drying, high quality interior oil-based stain applies easily and enhances the wood's natural grain with its intensified depth of color and clarity.
-recommended for use on interior wood surfaces or surfaces on which the previous finish has been removed
- preferred for hardwoods, such as oak, ash, walnut, and mahogany
Coverage
Approximately 500 square feet per gallon depending on the porosity and texture of
the wood.
Application
Stir well before and during use. Stain may be brushed, sprayed or wiped onto the
surface. Before the stain dries, wipe off excess stain with a soft cloth. Allow stain to
dry thoroughly before applying topcoat
Dry Time
Oil-based finishes may be applied 30 minutes after wiping. Dry times may be extended due to humidity, low temperature, lack of air movement, excess stain
application or lack of penetration. Be sure surface is thoroughly dry
before
topcoating. Ideal drying conditions recommended are 70? to 75?F and 35 to 50%
humidity
Old Masters 61204 Qt Sp Oak Fastdry Stain
Old masters, qt, spanish oak, fast dry stain, oil based, use on cabinets, doors, furniture, floors or woodwork, apply second coat or clear finish after only 30 minutes, deep color intensity with one coat, deep penetration, can be intermixed to create custom colors
Exterior Spar-Marine Oil Based Varnish, Gloss Gallon
SPAR-MARINE VARNISH
This is a superior exterior coating formulated to produces a high quality, flexible finish to withstand water and weather. It also contains Ultra Violet Absorbers for advanced sun protection.
Clear finishes are used to seal and protect surfaces. In many cases, clear finishes offer lasting, durable protection from abrasion, marring and chipping. Most clear finishes also protect the surfaces from damage caused by water and alcohol.
Exterior clear finishes provide protection to withstand water, weather and sunlight.
Clear exterior coating w/Tung oil & UV absorbers
Flexible finish withstands weathering
Resists sun, water & salt spray
Gloss